카테고리 없음

Quick Star Fire Alarm Manual

clivarulpodohy 2020. 10. 4. 22:56



Home

>

Industries & Applications

>

Commercial Facilities

>

Fire Alarm Products

Edwards Signaling manufacturers a complete line of audible and visual signals for industrial and commercial applications. Products include: fire alarm control panels, flashing and steady LED and halogen beacons and lights, strobes, vibrating horns and bells, outdoor warning sirens, public address and intercom systems, LED message centers and electronic system signals. Adt smoke alarm setup guide printer’s instructions: manual,quick start,nova,smoke - nortek p/n: 10015711b- ink: black plus pms 286c - material: 105g coated paper - size: 105mm x 105mm - scale: 1-1 - binding: trim, fold and saddle stitched - page 1 of 34.

E-FSC Series

Conventional Fire Alarm Control Panels

Description

Note: E-FSC series panels have been replaced by FX series conventional panels (FX-5 and FX-10)
The E-FSC Series fire alarm family consists of 3, 5 and 10 zone conventional fire alarm control panels, an integrated DACT/Dialer, serial annunciator modules, and serial remote relay modules. All of these components are microprocessor-controlled. The E-FSC Series family is ideal for both new and retrofit installations alike.
E-FSC Series incorporates features designed to simplify installation, operation and maintenance. These include front panel programming, one person walk testing, and selectable IDC and NAC types.
E-FSC Series panels are powerful enough to meet the demands of today’s installations while leaving plenty of room to grow in the future.
E-FSC502 and E-FSC1004 panels support Class A operation by combining pairs of on-board IDCs or NACs to provide the necessary Class A circuits. For example, the E-FSC1004 comes factory set to support 10 Class B IDCs and four NACs. But it can be field-configured to provide five Class A IDCs, no Class B IDCs, and two Class A NACs – or any other combination of circuits that fall within the circuit-pairing parameters.



    • Available in 3, 5, and 10 IDC models

    • IDC or NAC pairs convertible to single Class A circuits (10 and 5 IDC panels only)

    • Combination Waterflow and Supervisory IDCs

    • NACs programmable by zone and individually selectable for Genesis, continuous, temporal outputs, or coded

    • Front panel programmable simplifies installation and servicing PC programmable with optional DACT installed

    • Genesis option allows precision synchronization and audible silence over two wires without additional modules

    • On-board relays for Alarm, Supervisory and Trouble

    • Optional serial bus relay modules are programmable for common or zone activation

    • Optional serial bus remote annunciator family

    • One person walk-test (audible or silent)

    • Expandable power supply on 10 IDC panel reduces booster power costs

    • Optional City Tie and Reverse Polarity Modules

    • Trim ring available for semi-flush mounting

    • Optional fully integrated DACT/Dialer for PC programming

    • Supports Edwards ED2M, SC and 2400 series detectors and ESL 400, 500 and 700 series detectors
Link to this product
for email:

For web page (with image):

Quick

Catalog Numbers

Catalog Number Description

Alarm

 

Specifications

Approvals

Agency ApprovalsSpecifications

E-FSC1004 Series

  • Power Supply: 4.25 amps expandable to 8.5 amps
  • NAC Voltage Rating: 24V FWR
  • Maximum NAC current: 2.0 amps each, 3.5 amps total; 7.0 amps w/ optional transformer
  • AC Input
    • 120V AC 50/60 Hz: 2.2 amps w/ optional transformer
  • Base Panel Current Draw
    • Standby: 128 mA
    • Alarm: 242 mA
  • Panel Battery Charge Capacity (sealed lead acid only): Up to two 24 Ah batteries, 10 Ah in cabinet
  • Auxiliary Current: 0.5 amps max. May be programmed as resettable.
  • Auxiliary Output: 21.2 to 25.7 Vdc
  • IDC Alarm Current: 3.0 mA (Consult detector compatibility list p/n 3100468 for maximum detectors per circuit)
  • IDC Circuit:
    • Maximum loop resistance: 13 Ohms
    • Maximum loop capacitance: 0.03 microF
  • IDC Operating Voltage: 16.3 to 28 Vdc
  • UL Detector ID: 100
  • Alarm Contact (Form C): 30 Vdc @ 1 A (resistive load)
  • Trouble Contact (Form C): 30 Vdc @ 1 A (resistive load)
  • Supervisory Contact (Form C): 30 Vdc @ 1 A (resistive load)
  • Operating Environment
    • Temperature: 32 - 120F (0 - 49C)
    • Humidity: 5 - 93% RH, non-condensing
  • Terminals (wire gauge): 18 - 12 AWG (0.75 mm² - 2.5 mm²)
  • Asynchronous Serial Communications
    • Maximum resistance: 13 Ohms
    • Maximum capacitance: 0.03 microF


E-FSC502 Series

  • Power Supply: 4.25 amps total
  • NAC Voltage Rating: 24V FWR
  • Maximum NAC current: 2.0 amps each, 3.5 amps total
  • AC Input
    • 120V AC 50/60 Hz: 1.25 amps
  • Base Panel Current Draw
    • Standby: 104 mA
    • Alarm: 224 mA
  • Panel Battery Charge Capacity (sealed lead acid only): Up to 24 Ah, 7Ah max in cabinet *
  • Auxiliary Current: 0.5 amps max. May be programmed as resettable.
  • Auxiliary Output: 21.2 to 25.7 Vdc
  • IDC Alarm Current: 3.0 mA (Consult detector compatibility list p/n 3100468 for maximum detectors per circuit)
  • IDC Circuit:
    • Maximum loop resistance: 13 Ohms
    • Maximum loop capacitance: 0.03 microF
  • IDC Operating Voltage: 16.3 to 28 Vdc
  • UL Detector ID: 100
  • Alarm Contact (Form C): 30 Vdc @ 1 A (resistive load)
  • Trouble Contact (Form C): 30 Vdc @ 1 A (resistive load)
  • Supervisory Contact (Form C): 30 Vdc @ 1 A (resistive load)
  • Operating Environment
    • Temperature: 32 - 120F (0 - 49C)
    • Humidity: 5 - 93% RH, non-condensing
  • Terminals (wire gauge): 18 - 12 AWG (0.75 mm² - 2.5 mm²)
  • Asynchronous Serial Communications
    • Maximum resistance: 13 Ohms
    • Maximum capacitance: 0.03 microF


E-FSC302 Series

  • Power Supply: 4.25 amps total
  • NAC Voltage Rating: 24V FWR
  • Maximum NAC current: 2.0 amps each, 3.5 amps total
  • AC Input
    • 120V AC 50/60 Hz: 1.25 amps
  • Base Panel Current Draw
    • Standby: 96 mA
    • Alarm: 180 mA
  • Panel Battery Charge Capacity (sealed lead acid only): Up to 24 Ah, 7Ah max in cabinet *
  • Auxiliary Current: 0.5 amps max. May be programmed as resettable.
  • Auxiliary Output: 21.2 to 25.7 Vdc
  • IDC Alarm Current: 3.0 mA (Consult detector compatibility list p/n 3100468 for maximum detectors per circuit)
  • IDC Circuit:
    • Maximum loop resistance: 13 Ohms
    • Maximum loop capacitance: 0.03 microF
  • IDC Operating Voltage: 16.3 to 28 Vdc
  • UL Detector ID: 100
  • Alarm Contact (Form C): 30 Vdc @ 1 A (resistive load)
  • Trouble Contact (Form C): 30 Vdc @ 1 A (resistive load)
  • Supervisory Contact (Form C): 30 Vdc @ 1 A (resistive load)
  • Operating Environment
    • Temperature: 32 - 120F (0 - 49C)
    • Humidity: 5 - 93% RH, non-condensing
  • Terminals (wire gauge): 18 - 12 AWG (0.75 mm² - 2.5 mm²)
  • Asynchronous Serial Communications
    • Maximum resistance: 13 Ohms
    • Maximum capacitance: 0.03 microF

Documentation

Quick Star Fire Alarm Manual Free

Brochures

  • Fire Alarm Life Safety Product Guide.pdf

    A guide for the Edwards fire alarm products, including the E-FSC conventional panels, E-FSA addressable panels, initiating devices, signaling devices, and accessories.

Catalog PagesData SheetsFire Alarm Sales Tools

  • Fire Alarm FAQs_v2.pdf

    This contains a list of commonly asked questions (with answers) regarding fire alarm systems.

  • NAC Load_Wiring and dB_Calcs_V8.xls

    This spreadsheet will help calculate signal circuit loads, wire distances, and dB loss for speaker circuits.

  • E-FSC Panel Battery Calculations

    Battery calculations for the E-FSC conventional fire alarm panels.

  • 85001-0541-E--Strobe Handbook.pdf

    A guide to the application and installation of fire alarm strobe devices.

Installation InstructionsOtherTechnical Bulletins

  • Tech Bulletin TF00003E

    AC Power Fail May Cause NACs to Turn Off

  • Tech Bulletin 090811-2 Dialer Troubleshooting.pdf

    Tips on troubleshooting problems with dialers.

  • AE_Bull_011513_Dialers_Internet_Cell.pdf

    This bulletin provides tips for using Edwards dialers with TCP/IP internet and GSM (cellular phone) interface devices used for connecting to central monitoring stations.

  • AE Bulletin, Door Holders and Fire Alarm

    Tips on how to connect door holders to fire alarm systems.

Installation and User Guides

Instructions and manuals are best downloaded from our individual product pages via the menu bar above. However, for your convenience, the main instructions for each of C-TEC's product ranges (typically our control panel manuals) can be downloaded via the menus below. If you cannot find what you are looking for either here or on our product pages please contact our marketing team at marketing@c-tec.co.uk

CFP Economy Panel Installation Manual

Download

CFP Universal User Manual

Download

EP203 Extinguisher Panel Short Form Install Manual

Download

EP203 Extinguisher Panel Main Install Manual

Download

XFP 1 Loop 16 Zone Panel Engineering Manual

Download

XFP 1/2 Loop 32 Zone Panel Engineering Manual

Download

Manual Fire Alarm System Definition

XFP Universal User Manual/Log Book

Download

Quick Star Fire Alarm Manual Pdf

ZFP Engineering Manual

Fire Alarm Installation Manual

Download

ZFP User Manual/Log Book

Download

PC Serial Comm Port setup for C-TEC Control Panels

Download

Please visit our Power Supply product pages to download the instructions for this range of products.

ECU4/8/16 Engineering Manual

Download

Please visit our Conventional Call System product pages to download the instructions for this range of products.

QT601/2 Quantec Controller Engineering Manual

Quick Star Fire Alarm Manual Download

Download

PC Serial Comm Port setup for C-TEC Control Panels

Download

Please visit our Induction Loop System product pages to download the instructions for this range of products





'카테고리 없음'의 다른글

  • 현재글Quick Star Fire Alarm Manual

티스토리툴바